Glossary Of Technical Terms - Multiplex Profi TX Operating Instructions Manual

Appendix
PROFI TX

Glossary of technical terms

Allocation
Permanently allocating a set value to a digi-adjuster.
Assignment
Defines which function in the transmitter or model is controlled or switched by
which control.
Battery management
Determines the remaining operating time (time to empty), the capacity and
other battery data from the current and voltage characteristics. Optimises the
charge / discharge limits for a long battery life.
Binding
Required to ensure that the receiver exclusively responds to signals from its
specific (bound) transmitter. The binding procedure must be performed during
initial setup.
Re-binding is required when switching to the "FastResponse" option.
FastResponse reduces the transmission cycle to 14ms and the number of
available servo channels is reduced to 12.
Centre trim
Trim corrections do not change the end-travels.
Combi-Switch
Links aileron and rudder in a way that allows both of the control functions to
be controlled by either of the functions. This makes it easier to fly accurate
turns.
Control
Any transmitter control which can be assigned to a control function or
switched function:
o
Sticks
o
Slide potentiometers
o
Rotary potentiometers
o
Switches and their designated buttons
Control function
Seite 215