Disable Lldp; Config Lldp - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable LLDP:
DGS-3620-28SC:admin#enable lldp
Command: enable lldp
Success.
DGS-3620-28SC:admin#
57-2

disable lldp

Description
This command is used to disable LLDP. The switch will stop the sending and receiving of LLDP
advertisement packets.
Format
disable lldp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable LLDP:
DGS-3620-28SC:admin#disable lldp
Command: disable lldp
Success.
DGS-3620-28SC:admin#
57-3

config lldp

Description
This command is used to configure LLDP timer values. The message TX interval controls how
often active ports retransmit advertisements to their neighbors. The message TX hold multiplier is
a multiplier on the msgTxInterval that is used to compute the TTL value of txTTL in an LLDPDU.
680