Adjusting The Size And Position; Setting The Image Size Preset - Christie D13WU2-HS User Manual

Adjusting the size and
position
Adjust the projector's size and position. Christie recommends warming the lens before completing
these procedures as focus may change as the lens warms.

Setting the image size preset

Set the image size preset to display the image in its native resolution or to resize by maximizing the
height, width, both height and width, or to the maximum size while keeping the original aspect
ratio.
1. Select Menu > Size & Position > Size Presets.
2. Select the appropriate size preset:
• Auto—Display with the detected size.
• Native—Display in its native resolution.
• 4:3—Retain 4:3 aspect ratio.
• Letterbox—Make the active content enlarge to the full screen.
• Full Size—Fill the screen, regardless of the source.
• Full Width—Fill display width and keep aspect ratio.
• Full Height—Fill display height and keep aspect ratio.
• Custom—Stretch the display horizontally and vertically without cutting the image
display.
• 3D Mode—Display 3D content. All other items are grayed out, if 3D Mode is selected.
3. To confirm the selection, press ENTER.
HS Series 2K User Manual — D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001466-06 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA Inc. All rights reserved.
26