Install Intake Manifold - Toyota 1 MZ–FE Manual

1MZ–FE ENGINE – ENGINE MECHANICAL
(d) Install the pressure regulator with the 2 bolts.
Torque: 8 N–m (80 kgf–cm, 69 in.–lbf)

19. INSTALL INTAKE MANIFOLD

Install the intake manifold with the 9 bolts, 2 nuts and
2 plate washers.
Torque: 15 N–m (150 kgf–cm, 11 ft–lbf)
20. RETIGHTEN WATER OUTLET MOUNTING BOLTS
AND NUTS
Torque: 15 N–m (150 kgf–cm, 11 ft–lbf)
21. INSTALL AIR ASSIST HOSE
22. INSTALL WATER INLET PIPE
(a) Install a new O–ring to the water inlet pipe.
(b) Apply soapy water to the O–ring.
EG2–109