Toyota 1 MZ–FE Manual page 185

1MZ–FE ENGINE – ENGINE MECHANICAL
20. CONNECT ENGINE WIRE TO CABIN
(a) Push in the engine wire through the cowl panel. Install
the 2 nuts.
(b) Connect the wire clamp.
(c) Connect the following connectors:
(1) 3 engine ECM connectors
(2) 5 cowl wire connectors
(3) Cooling fan ECU connector
(d) Install the following parts:
(1) Glove compartment
(2) Glove compartment door
(3) Lower instrument panel
(4) Under cover
21. CONNECT TRANSAXLE CONTROL CABLE TO
TRANSAXLE
EG2–185