Toyota 1 MZ–FE Manual page 236

EG2–236
1MZ–FE ENGINE – SFI SYSTEM
3. REMOVE FLOOR SERVICE HOLE COVER
(a) Disconnect the fuel pump connector.
(b) Remove the 5 screws and service hole cover.
4. REMOVE FUEL PUMP LEAD WIRE
NOTICE: Do not lift the fuel pump up with the wire
harness picking.
5. DISCONNECT FUEL PIPE AND HOSE FROM FUEL
PUMP BRACKET
CAUTION: Remove the fuel filter cap to prevent the fuel
from flowing out.
(a) Using SST, disconnect the outlet pipe from the pump
bracket.
SST 09631– 22020
(b) Disconnect the return hose from the pump bracket.
6. REMOVE FUEL PUMP BRACKET ASSEMBLY FROM
FUEL TANK
(a) Remove the 8 bolts.
(b) Pull out the pump bracket assembly.
(c) Remove the gasket from the pump bracket.