Remove Crankshaft - Toyota 1 MZ–FE Manual

EG2–150
Crankshaft
number mark
1MZ–FE ENGINE
Standard sized Bearing Selection Chart
Cylinder block number mark
EXAMPLE: Cylinder block "06", Crankshaft "08"
(l) Completely remove the Plastigage.

7. REMOVE CRANKSHAFT

(a) Lift out the crankshaft.
(b) Remove the 4 upper main bearings and 2 upper thrust
washers from the cylinder block.
HINT: Arrange the main bearing caps, bearings and
thrust washers in correct order.
– ENGINE MECHANICAL
= Use bearing "3"