Toyota 1 MZ–FE Manual page 26

EG2–26
1MZ–FE ENGINE – ENGINE MECHANICAL
27. REINSTALL AIR INTAKE CHAMBER
(a) Using an 8 mm hexagon wrench, install a new gasket
and the air intake chamber with the 2 bolts and 2 nuts.
Torque: 43 N–m (440 kgf–cm, 32 ft–lbf)
(b) Connect the following hoses:
(1) 2 water bypass hoses
(2) Air assist hose
(c) Connect the following vacuum hoses:
(1) 2 vacuum hoses to TVV
(2) Vacuum hose to cylinder head rear plate
(3) Vacuum hose to charcoal canister
(d) Connect the following connectors:
(1) Throttle position sensor connector
(2) IACV valve connector
(3) EGR gas temperature sensor connector
(4) A/C idle–up connector