EG2–304
1MZ–FE ENGINE
–
SFI SYSTEM
5. REMOVE EGR GAS TEMPERATURE SENSOR
6. INSPECT EGR GAS TEMPERATURE SENSOR
Using an ohmmeter, measure the resistance between
the terminals.
Resistance:
64 – 97 k
at 502C (1122 F)
11 – 16 k
et 1002C (2122F)
2 – 4 k
at 1502C (3022F)
If the resistance is not as specified, replace the
sensor.
7. REINSTALL EGR GAS TEMPERATURE SENSOR
Torque: 20 N–m (200 kgf–cm, 14 ft–lbf)
8. REINSTALL EGR VALVE AND VACUUM
MODULATOR ASSEMBLY
(a) Install the EGR valve and vacuum modulator assembly
with the 3 nuts.
Torque: 12 N–m (120 kgf–cm, 9 ft–lbf)