Toyota 1 MZ–FE Manual page 115

1MZ–FE ENGINE – ENGINE MECHANICAL
39. INSTALL INTAKE AIR CONTROL VALVE TO AIR
INTAKE CHAMBER
(a) Install a new gasket to the air intake chamber.
(b) Apply a light coat of engine oil to the rubber portions.
(c) Apply seal packing to the positions of the intake air
control valve as shown in the illustration.
Seal packing:
Part No. 08826–00080 or equivalent
(d) Install the intake air control valve and data link con–
nector 1 clamp with the 3 nuts.
Torque: 14.5 N–m (145 kgf–cm, 10 ft–lbf)
(d) Connect the A/C air hose.
40. INSTALL AIR INTAKE CHAMBER
(a) Using an 8 mm hexagon wrench, install a new gasket
and the air intake chamber with the 2 bolts and 2 nuts.
Torque: 43 N–m (440 kgf–cm, 32 ft–lbf)
(b) Connect the following hoses:
(1) 2 water bypass hoses
(2) Air assist hose
(c) Connect the following vacuum hoses:
(1) 2 vacuum hoses to TVV
(2) Vacuum hose to cylinder head rear plate
EG2–115