Install Radiator - Toyota 1 MZ–FE Manual

1MZ–FE ENGINE – ENGINE MECHANICAL
25. CONNECT ENGINE WIRE
(a) Connect the wire clamps.
(b) Connect the ground strap with the bolt.
(c) Connect the connector to the LH fender apron.
(d) Connect the wire clamps
(e) Connect the following wires and connectors:
(1) 2 igniter connectors
(2) Noise filter connector
(3) Connector to LH fender apron
(4) 2 ground straps
(5) 5 connectors to relay box
(f) Connect the engine relay box with the 2 bolts.

26. INSTALL RADIATOR

(See page EG2–342)
27. w/ CRUISE CONTROL SYSTEM:
INSTALL CRUISE CONTROL ACTUATOR
(a) Connect the actuator and bracket with the 3 bolts.
(b) Connect the actuator connector and clamp.
(c) Install the actuator cover with the bolt and clip.
EG2–187