Toyota 1 MZ–FE Manual page 138

EG2–138
1MZ–FE ENGINE – ENGINE MECHANICAL
(b) Insert the blade of SST between the No. 1 and No.2 oil
pans, and cut off applied sealer and remove the No. 1
oil pan.
SST 09032 – 00100
NOTICE:
Be careful not to the damage the No.2 oil pan con–
tact surface of the No.1 oil pan.
Be careful not to damage the No.2 oil pan flange.
12. REMOVE OIL STRAINER
Remove the bolt, 2 nuts, oil strainer and gasket.
13. REMOVE NO.1 OIL PAN
(a) Remove the 17 bolts.
(b) Using a screwdriver, remove the No. 1 oil pan by
prying the portions between the cylinder block and
No.1 oil pan.
NOTICE: Be careful not to damage the contact surfaces
of the cylinder block and No.1 oil pan.