Remove Radiator - Toyota 1 MZ–FE Manual

1MZ–FE ENGINE – ENGINE MECHANICAL

9. REMOVE RADIATOR

(See page EG2–336)
10. DISCONNECT ENGINE WIRE
(a) Remove the 2 bolts and disconnect the engine relay
box.
(b) Disconnect the following wires and connectors:
(1) 5 connectors from relay box
(2) 2 igniter connectors
(3) Noise filter connector
(4) Connector from LH fender apron
(5) 2 ground straps
(c) Disconnect the wire clamp.
(d) Disconnect the connector from the LH fender apron.
(e) Remove the bolt and disconnect the ground strap.
(f) Disconnect the wire clamp.
11. DISCONNECT VACUUM HOSES
Disconnect the following vacuum hoses:
(1) Vacuum hoses from vacuum tank for intake air
control valve
EG2–125