Toyota 1 MZ–FE Manual page 270

EG2–270
1MZ–FE ENGINE – SFI SYSTEM
(d) Connect the following vacuum hoses:
(1) Vacuum hose (from charcoal canister)
(2) Vacuum hose (from port R of EGR vacuum
modulator)
(3) Vacuum hose (from port R of EGR vacuum
modulator)
(4) Vacuum hose (from upper port of TVV)
(5) Vacuum hose (from lower port of TVV)
(e) Install the hose clamp.
(f) Connect the IAC valve connector.
(g) Connect the throttle position sensor connector.
2. INSTALL AIR CLEANER HOSE
(a) install the air cleaner hose with the 2 hose clamps.
(b) Connect the PCV hose.
3. CONNECT THROTTLE CABLE
4. CONNECT ACCELERATOR CABLE
5. FILL WITH ENGINE COOLANT
Capacity:
8.7 liters (9.2 US qts, 7.7 Imp.qts)
6. CONNECT NEGATIVE (–) TERMINAL CABLE
TO BATTERY