Toyota 1 MZ–FE Manual page 214

EG2–214
1MZ–FE ENGINE – EMISSION CONTROL SYSTEMS
(b) Install and torque the 3 nuts.
Torque: 12 N–m (120 kgf–cm, 9 ft–lbf)
(c) Connect the following vacuum hoses:
(1) Vacuum hose to P port of EGR vacuum modula–
tor
(2) Vacuum hose to a port of EGR vacuum modula–
tor
(3) Vacuum hose to R port of EGR vacuum modula–
tor
(4) Vacuum to EGR valve
10. RECONNECT EGR GAS TEMPERATURE SENSOR
CONNECTOR AND CLAMP
11. REINSTALL EGR PIPE
Install 2 new gaskets and the EGR pipe with the 4
nuts.
Torque: 12 N–m (120 kgf–cm, 9 ft–lbf)