Toyota 1 MZ–FE Manual page 350

EG2–350
1MZ–FE ENGINE – FE ENGINE – COOLING SYSTEM
(e) Measure the oil pressure at idling.
Oil pressure:
981 – 1,961 kPa
(10 – 20 kgf/cm
(f) Remove the SST from the data link connector 1.
SST 09843–18020
(g) Check that the oil pressure decreases.
3. REMOVE OIL PRESSURE GAUGE, AND
RECONNECT PRESSURE HOSE TO HYDRAULIC
MOTOR
(a) Remove the pressure gauge.
(b) Connect the pressure hose to the hydraulic motor
with a new gasket and the union bolt.
Torque: 63.7 N–m (650 kgf–cm, 47 ft–lbf)
Hydraulic Pump (PS pump)
(See SR section)
2
, 142 – 284 pal)