Toyota 1 MZ–FE Manual page 71

1MZ–FE ENGINE – ENGINE MECHANICAL
30. REMOVE NO.3 TIMING BELT COVER
Remove the 6 bolts and belt cover.
31. REMOVE CYLINDER HEAD REAR PLATE
(a) Disconnect the vacuum hose from the vacuum tank.
(b) Remove the nut, and disconnect the ground strap.
(c) Remove the bolt and rear plate.
32. REMOVE WATER INLET PIPE
(a) Remove the bolt and inlet pipe.
(b) Remove the O–ring.
33. REMOVE AIR ASSIST HOSE AND VACUUM HOSE
34. REMOVE INTAKE MANIFOLD, DELIVERY PIPES
AND INJECTORS
Remove the 9 bolts, 2 nuts, 2 plate washers and
intake manifold together with the delivery pipes, and
injectors.
EG2–71