4.2 Rear panel
R
L
R
L
R
AUDIO IN 1
AUDIO IN 2
AUDIO IN 3
IN 2
IN 3
IN 4
HDMI / DVI
HDMI / DVI
HDMI / DVI
①
②
#
Part name
①
HDMI input connector
②
HDMI cable fixing hole
③
DVI input connector
④
Analog video input
connector
⑤
Audio input connector
⑥
HDMI output connector
⑦
HDBaseT output
connector
⑧
Audio output connectors
⑨
LAN port
⑩
RS-232C ports
⑪
Maintenance port
⑫
AC power connector
⑬
Frame ground
⑤
L
R
L
R
L
R
L
R
AUDIO IN 4
AUDIO IN 5
AUDIO IN 6
AUDIO IN 7
IN 5
IN 6
ANALOG RGB / YPbPr / VIDEO
HDMI / DVI / ANALOG
③
④
[Fig. 4.2] Rear panel drawing (MSD-702)
Input connectors for HDMI and DVI signal to connect to a source
devices, such as Blu-ray players.
Fixes HDMI cables by inserting cable clamps.
Connects a DVI-I cable or DVI-D cable.
HDMI signal can be input using an HDMI-DVI conversion cable. Analog
video also can be input using a DVI-analog conversion cable.
The following video signal can be input: analog RGB (such as PCs),
YPbPr (SDTV/HDTV), composite video (NTSC/PAL), and S-video
(NTSC/PAL)
Input connector for stereo audio signal
Output connector for HDMI and DVI signal to connect to sink devices
such as LC monitors and projectors
Digital (video/audio) signal can be extended up to 100 m/328.08 ft.
using an HDC receiver together.
Analog output connectors of audio to connect to amplifier, speakers,
and mixers.
For external control by communication commands or web browsers
For external control by communication commands
Not used.
Keep this connector free
For the provided power cable
For indoor ground terminal. M3 screws are used.
⑩
⑨
L
UPDATE
RS-232C
LAN
IN 7
R
L
R
L
AUDIO OUT 1
AUDIO OUT 2
ANALOG RGB / YPbPr / VIDEO
⑪
⑧
Description
【See [Fig. 5.8] Attaching a cable clamp】
【See: HDMI-DVI Conversion cable】
【See: Analog video input conversion cable】
【See: Analog video input connector】
MSD-501/502/701/702 User's Guide
⑦
⑬
OUT 1
OUT 2
AC 100-240V 50Hz / 60Hz (FUSE T2.5A 250V)
HDBaseT
HDBaseT
B
B
LINK
LINK
FG
OUT 1
A
OUT 2
A
HDMI / DVI
HDMI / DVI
⑥
⑫
【See: DVI input connector】
15