Saving All Settings - IDK MSD-501 User Manual

MSD-501/502/701/702 User's Guide

7.14.5 Saving all settings

Menu Top→PRESET MEMORY→SAVE ALL SETTING
Setting value No.1 to No.8
You can save up to eight preset memories (up to 10 characters) of the following settings:
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
Menu
Selecting input
channel
Setting position, size,
and masking
Quality setting
Input settings
Setting input timing
Output settings
Audio settings
EDID (Extended
Display Identification
Data)
86
[Table 7.19] Settings can be saved in preset memory
Selecting input channel
Output resolution, Aspect ratio of sink device, Aspect ratio, Aspect ratio control,
Overscan, Display position, Display size, Masking, Background color, Test
pattern
Sharpness, Brightness, Contrast, HUE, Saturation, Black level
No-signal input monitoring, HDCP input enabled/disabled, Input equalizer,
Signal type of analog input, Automatic detection of input video interruption,
Selecting signal of DVI input connector
The total number of horizontal dots, Start position, Active area, Automatic
measurement of start position, Automatic setting of input timing, Tracking
Output equalizer, Output mode, Synchronous signal output with no input video,
Output video with no input video, Window transition effect, Window transition
speed, Wipe color, Video output connector, HDCP output, The number of
HDCP retries, Deep Color, CEC connection
Output level, Output mute, Input selection, Input level, Lip sync, Sampling
frequency, Audio output connector, Digital audio output connector, Multi
channel audio output, Test tone
EDID, Resolution for PCs, Input resolution for AV devices, Deep Color, Audio
format, Speaker configuration
Item