Error message
Error message
Browser
FILE NAME INVALID
FILE DATA INVALID
FILE DATA SIZE OVER
MEMORY ALLOCATE
ERROR
-
7.15.2 Outputting bitmap image
Menu
Top→BITMAP→BITMAP OUTPUT
Setting for
Each output (COMMON TO OUTA AND OUTB)
Setting value OFF [Default], ON
You can enable/disable the bitmap image output.
If several bitmaps are registered, select the bitmap number you want to output.
7.15.3 Background color
Menu
Top→BITMAP→BACKGROUND COLOR
Setting for
Each output/bitmap
Setting value R / G / B: 0 to 255 [Default]: R / G / B: 255 (white)
You can set the background color of bitmap.
If you set "LINK" to "ON", you can set only Red (R). Settings of Green (G) and Blue (B) are also changed
according to the setting of the Red (R).
RS-232C/LAN
communication
-
File format error
File size error
Memory allocate error
Time out
MSD-501/502/701/702 User's Guide
Error description
The file name was specified incorrectly.
The MDS does not support this file.
The resolution exceeds the maximum resolution.
Enough memory to save the bitmap file temporarily
could not be allocated. You may solve this error by
rebooting the MSD and sending the bitmap file again.
Send bitmap data consecutively. If the interval is 2
seconds or longer, an error causes.
91