Table of Contents
Advertisement
■ Error code
From the left, statuses of video output, digital audio output, and analog audio output are displayed.
(Example: AAA)
Code
If any number or character is not displayed, video or audio is output correctly.
"7.8.8 Video output connector" is set to
1
"OFF".
2
Displayed only for digital input. DDC power supply is not input.
(If no source device is connected, this status is displayed).
3
No video signal is input.
4
Displayed only for digital input. Video or audio output of source device is in a Mute status.
5
Displayed only for digital input. Signal with HDCP are input, but the sink device does not support
HDCP. (This may also be displayed while authenticating HDCP).
6
Displayed only for digital input. The source device does not output required information (packets)
for outputting video or audio.
7
Signal that are not supported by the MSD are
input.(Sampling clock is out of the range).
－
8
－
9
Input is set to "OFF".
A
－
B
*1
Input status of analog audio signal cannot be detected. Even if this status is not displayed, audio may
sometimes not be output when analog input is selected.
*2
This status is only for HDMI output connectors.
[Table 7.33] Error code
Video output
MSD-501/502/701/702 User's Guide
Audio output
"7.9.2 Output mute" is set to "ON".
No audio signal is input
Audio cannot be output, because compressed
audio is input. (Compressed audio can be
output only to sink devices supporting
compressed audio).
"7.9.7 Audio output connector" is set to
"OFF".
"7.8.2 Output mode" is set to "DVI MODE" or
a sink device that does not support audio is
*2
connected.
"7.9.8 Digital audio output connector" is set
to "OFF".
*1
105
Advertisement
Table of Contents
