Table of Contents
Advertisement
MSD-501/502/701/702 User's Guide
Input number, which is any of "1" to "9", but types and the numbers of selectable input connectors differ
*1
depending on connected projectors.
*2
Fan error.
*3
Lamp error
*4
Temperature error
*5
Cover open error
*6
Filter error
*7
Other errors
*2 to *7 0: Error not detected or no detect error function, 1: Warning, 2: error
*8
Accumulated time of lamp, which is any of 0 to 99999. (For projectors that do not count the accumulated
time, the value is 0 at all times.).
*9
Whether the lamp illuminates or not (0 or 1).
0: Not illuminate
1: Illuminates
For devices containing several lamps, accumulated time and lightning state for each device are replied
in sequence. For example, if a device containing three lamps, the following command is replied:
"%1LAMP=accumulated time 1(SP) lightning state 1(SP) accumulated time 2(SP) lightning state 2(SP)
accumulated time 3(SP) lightning state 3 CR"
*10 Source number, which is input switchable. Any of 11 to 59 (Meaning is the same as that of "%INPT"
command). For devices containing several inputs, several statuses separated with a (SP) are sent. For
example, for a device having two inputs, "%1INST= source number1(SP)source number2CR" is sent.20
to FF in hex; up to 64 characters.
*11 20 to 7F in hex; up to 32 characters.
78
Advertisement
Table of Contents
