Table of Contents
Advertisement
(*9)
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However,
the Connection Reset feature will fix these problems automatically, without the need to physically remove and insert the cables. It creates the same condition as if the cable
were physically disconnected and reconnected. This feature only works for this device's output. If other devices are connected between this device's output and sink device,
this feature may be invalid.
(*10)
The sink device need to support CEC. Some sink devices cannot be controlled by the MSD through CEC.
MSD-501/502/701/702 User's Guide
109
Advertisement
Table of Contents
