Table of Contents
Advertisement
MSD-501/502/701/702 User's Guide
7.15.8 Dividing memory area
Menu
Top→BITMAP→DIVIDE MEMORY
Setting value
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to
press the MENU/SET key to update the setting.
[Table 7.22] Dividing memory area
You can register up to four bitmaps within the available memory area by dividing the memory. You can select
one of three dividing modes or specify the size you want to divide manually.
Memory areas are controlled by blocks. 1 block = 64K bytes; 128 blocks = 8M bytes in total
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
MODE (dividing mode)
NUMBER (the number of partitions)
DISPLAY (displaying method)
End block position
94
[Table 7.22] Dividing memory area
Setting item
Setting value
RESIZE,DELETE,AUTO
1 to 4
BLOCK,BYTE
0 to 127
Default
RESIZE
1
BLOCK
127
Advertisement
Table of Contents
