IDK MSD-501 User Manual page 108

MSD-501/502/701/702 User's Guide
Item
Output Audio Digital audio
Analog audio
Lip resync.
Cable maximum extension distance
Function-o Analog video processing unit
n
Scan converter
Others
External RS-232C
control
LAN
External control
Others Power
Power consumption
(approx.)
Dimension
Weight
Temperature
Humidity
Supplied items
Option
(*1) This product supports 30 bits/pixel Deep color (10 bit/component). It does not support xvYCC, Automatic Lip Sync, 3D, ARC, or HEC. (Lip sync can be adjusted manually.)
(*2) Digital twisted pair output does not support DVI signal with HDCP. If you need to extend DVI signal with HDCP, please use the IDK's HDC-RD100 as a receiver.
(*3) Digital twisted pair output is only for extending video, audio, power for a receiver, control signal using a Cat5e/Cat6 twisted pair cable. IDK receivers are required.
Please do not connect LAN devices to this connector.
(*4) Wiring is straight T568A or T568B. If exceeding 164.04 ft./50 m, it is recommended to use a Cat6 cable.
(*5) Transmission distance depends on connected devices. The information above is maximum transmission distance when a cable made by IDK (AWG24) is used and signal
(1080p 60 Hz 24bit/pixel (8bit/component)) are transmitted (both inputs and outputs of this product). When a connected device does not match to this product or other
manufacturers' cables are used, video signal can be unstable or cannot be output, even though the transmission distance is within the information above.
(*6) Since some LCD monitors do not stabilize during operation, please check the operation before using or ask IDK for advices.
(*7) Seamless Switching has one black frames or back color.
(*8) The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signal and mainly occurs at start-up. This feature does not work when
snow noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
108
MSD-501/502
1 output / 2 outputs × 2 distribution for each
Connector: MSD-501
HDMI Type A (19pin)・female × 1,
RJ-45 × 1
MSD-502
HDMI Type A (19pin)・female × 2,
RJ-45 × 2
Multi-channel linear PCM: up to 8 channels
Sampling frequency: 32 kHz to 192 kHz Sample size: 16 bit to 24 bit
Standard level: -20 dBFS Output level: up to 0 dBFS
MSD-501/502
1 output/2 outputs
Connector: RCA pin jack
Stereo L/R imbalance signal
Output impedance: 75 Ω, Standard level: -10 dBu Output level: up to +10 dBu
Up to 16 frames
Digital input: Up to 32.8 ft. to 98.43 ft./10 m to 30 m (*5)
Digital output: HDMI / DVI up to 32.8 ft. to 164.04 ft./10 m to 50 m (*5) Digital signal for extension: up to
328.08 ft./100 m (*6)
3D Y/C separation
Aspect Ratio Control, Seamless Switching (*7), Picture adjustment (brightness, contrast, display position,
display size), Motion adaptive I/P conversion
Volume adjustment (volume of input and output ports can be set separately)
Audio breakaway enables independent audio and video switching
Cross-point memory (storage for 7 settings )
Preset memory (8 settings and startup settings)
Last memory
Anti-Snow (*8)
Connection Reset (*9)
External control commands (32 commands)
Front panel security key lock
1 port: D-sub 9 pin connector・Male
1 port: RJ-45 connector 10Base-T/100Base-TX (Auto Negotiation), Auto MDI / MDI-X
Outputting command from RS-232C,LAN, or digital signal output from extension to external devices
PJLink (class1),
Controlling power supply of sink device through CEC (*10)
AC to 100 V - 240 V ±10%,50 Hz/60 Hz±3 Hz
MSD-501: 35 W
MSD-502: 43 W
MSD-701: 38 W
MSD-702: 48 W
16.93 (W)" x 1.73 (H)" x 11.81 (D)"/430 (W) x 44 (H) x 300 (D) mm (EIA rack 1U and projections are not
included)
MSD-501:4.2 kg
MSD-502:4.2 kg
MSD-701:4.3 kg
MSD-702:4.3 kg
Operating temperature: 32 °F to 104 °F <0 °C to +40 °C>
Storage temperature: -4 °F to +176 °F <-20 °C to +80 °C>
Operating/ Storage humidity: 20 % to 90 % (Non Condensing)
RS-232C cable (5.9 ft./1.8 m), Power supply cable (5.9 ft./1.8 m), rack mounting bracket
Cable clamp:
MSD-501: × 3
MSD-502: × 4
MSD-701: × 4
MSD-702: × 5
1U rack mounting bracket (RM-OFS100)
Description
MSD-701/702
1 output / 2 outputs ×2 distribution for each
Connector: MSD-701
HDMI Type A (19pin)・female × 1,
RJ-45 × 1
MSD-702
HDMI Type A (19pin)・female × 2,
RJ-45 × 2
MSD-701/702
1 output/2 outputs
Connector: RCA pin jack