Quality Setting; Sharpness; Brightness; Contrast - IDK MSD-501 User Manual

7.5 Quality setting

Setting items for input channels are for correcting color bias.
Image quality to be output can be set for each input side (input channels) and output side (output channels) as
follows.
SATURATION
Input
signals
HUE

7.5.1 Sharpness

Menu Top→IMAGE EFFECT→INPUT SHARPNESS
Setting for Each input/input signal
Setting value -5 to +15 [Default]:0

7.5.2 Brightness

Menu Top→IMAGE EFFECT→INPUT BRIGHTNESS (Input side)
Setting for Input side
Output side
Setting value 80% to 120% [Default]:100%

7.5.3 Contrast

Menu Top→IMAGE EFFECT→INPUT CONTRAST (Input side) / OUTPUT CONTRAST (Output side)
Setting for Input side
Output side
Setting value R / G / B
If you set "LINK" to "ON", only settings of "R" can be set, and "G" and "B" change relatively.
Setting for input channels
SETUP SHARPNESS
[Fig. 7.6] Video correction
/OUTPUT BRIGHTNESS (Output side)
: Each input/input signal
: Each output (COMMON TO OUTA AND OUTB)
: Each input/input signal
: Each output (COMMON TO OUTA AND OUTB)
: 0% to 200% [Default]:R / G / B: 100%
MSD-501/502/701/702 User's Guide
Setting for output channels
BRIGHTNESS BRIGHTNESS
CONTRAST CONTRAST
Output
signals
39