Display 3D Diagnostic Test Patterns; Verify 3D Cinema Content; Troubleshooting - Christie Solaria One User Manual

d. Select True in the 3D Sync Polarity list.
e. Enter 430 in the Dark Time field or enter a value appropriate for your 3D hardware.
f. Enter -120 in the Output Delay field or enter a value appropriate for your 3D hardware.
g. Enter 0 in the Phase Delay field or enter a value appropriate for your 3D hardware.

14.10Display 3D Diagnostic Test Patterns

You can use 3D test patterns to verify your 3D hardware is functioning correctly.
1. Tap Menu > Channel Setup.
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Test Patterns.
4. Tap a test pattern.
5. Put on a pair of 3D glasses.
6. Look at the on-screen image, and then close your left eye and look at the image through your right eye.
Switch when the image alternates.
3D Test Pattern
RGB-12bit -3D Dynamic Range
RGB-12bit-3D Four Quadrant
RGB-12bit-3D Full White
RGB-12bit-3D Half Descending
RGB-12bit-3D Horizontal Ramp
RGB-12bit-3D L-Pattern

14.11 Verify 3D Cinema Content

1. Put on a pair of 3D glasses.
2. Play the 3D content.
3. Verify the left and right eye display correctly.
4. If the image is reversed:
a. Tap Menu > Channel Setup on the projector touch pad controller (TPC).
b. Select a 3D channel in the Channel Name list.
c. Select Inverted in the 3D Sync Polarity list.
14.12 3D Troubleshooting
In addition to the information provided in this topic, it is also recommend that you consult the documentation
provided with your 3D hardware to help resolve issues.
Reversed 3D Effect (Pseudo 3D)
14-6
Action
Alternates between 2 images.
Alternates between 2 images.
Alternates between 2 100% white images.
Alternates between 4 images.
Alternates between 2 horizontal ramp images.
Alternates between 2 images.
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)