Install A 3D Server With An Ycxcz Interface; Cp2210 User Manual I; Edit The Default 3D Lamp File; Define A Measured Color Gamut Data File - Christie CP2210 User Manual

4.11.3 Install a 3D Server with an YCxCz Interface

1. Install and connect your 3D hardware to the cinema projector.
2. Edit and apply the default 3D lamp file:
a. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
b. Set the brightness percentage for the lamp in the Power % field
c. Tap Save.
d. Repeat steps b and c for all remaining 3D channels.
3. Measure the color gamut and create a measured color file.
4. Edit the channel values for your theatre. The predefined 3D Channels are named: 3D Flat 1998x1080 and
3D Scope 2048x858.
5. Run test patterns to verify the performance of the new 3D channel formats.
6. Run 3D content to verify correct left and right eye data.

4.11.4 Edit the Default 3D Lamp File

For 3D images to display correctly, you must edit the default 3D lamp file to match the specifications of your
3D hardware.
1. Tap Menu > Advanced Setup > Lamp Power / LiteLOC
2. Select Default in the Current Lamp File list.
3. Set the brightness percentage for the lamp in the Power % field
4. Tap Save.

4.11.5 Define a Measured Color Gamut Data File

For 3D images to display correctly, you must define an MCGD file to match the specifications of your 3D
hardware.
1. Tap Menu > Advanced Setup > MCGD File Setup.
2. Hold a pair of 3D glasses in front of the light meter to determine the new x and y color coordinates for Red,
Green, Blue, and White. Use the same light path that you use to display a show.
3. Enter the x and y values in the Red, Green, Blue and White fields.
4. Tap Save As.
5. Enter 3D Onsite in the File Name field.
6. Tap Save.

4.11.6 Edit the 3D Flat 1998 x 1080 Channel

1. Tap Menu > Channel Setup.
2. Select 3D Flat 1998x1080 in the Channel Name list.
3. Tap Config 1 in the left pane and edit these settings:
a. Select 292-Dual in the Input list.
b. Select YCrCb 4:2:2 10 bits x2 in the Data Format list.
CP2210 User Manual
020-100410-08 Rev. 1 (05-2014)
Section 4: Adjusting the Image
.
™
Setup.
.
4-7