Table of Contents
Advertisement
To ensure safe operation, only use the AC power cord provided with the product or recommended
by Christie. Connect the AC power cord to the AC inlet on the projector.
Turning on the projector
The projector cables must be securely connected before turning the power on.
Warning! If not avoided, the following could result in death or serious injury.
• Do not look into the projector lens when the laser is on. The bright light may result in permanent
eye damage.
1. Plug the projector in to AC power.
The Power button on the built in keypad is illuminated when the power cables are connected.
2. Ensure no one or no objects are in the beam path before turning on the projector.
3. To turn on the projector, on the IR remote keypad or on the built-in keypad press
The status LED is green with a long blink.
4. To select an input source and turn it on, on the IR remote keypad select INPUT.
Available input sources are VGA, HDMI1, HDMI2, and HDBaseT.
The projector detects the source you selected and displays the image.
5. If using the projector for the first time, select a preferred language from the Main Menu after
the startup screen is displayed.
Turning off the projector
Power off the projector in preparation for inspection or maintenance.
1. To turn the projector off, on the IR remote keypad or built-in keypad select
A warning message appears on the displayed image.
2. To confirm your selection, select
If you do not select
projector remains on.
Inspire Series Installation and Setup Guide
020-002097-01 Rev. 1 (11-2023)
Copyright ©2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
again.
again, the warning message disappears after three seconds and the
Installation and setup
.
.
23
Advertisement
Table of Contents
