Section 700 - Operation
System Speed Dial
Description
Operation
Technical Manuals Online! - http://www.tech-man.com
Frequently called numbers can be stored using the System Speed Dial feature.
System Speed Dial numbers are programmed from the Attendant Phone and
can be used by any extension. With all versions, up to 90 System Speed Dial
Numbers can be stored. Beginning with CPC-AI1 and CPC-B Version 7.0 and
higher, up to 200 System Speed Dial numbers can be stored when the Speed
Dial Add-on mode is selected.
For information on assigning System Speed Dials see "Attendant Assignment
of Speed Dialing" on page 3-3.
To use a programmed.System Speed Dial key:
1. Press an unlit line key.
The phone issues outside dial tone.
l
The line LED lights green.
l
"CO TALK #XX" (where "XX" is the line number) appears on the
l
display.
2. Press the AUTO key.
"A" appears on the display.
3. Enter the System Speed Dial code (00-89 or 000-199).
The number and corresponding name appear on the display.
4. Complete your call and replace the handset.
The line LED changes from green to red and then goes off.
To check a programmed System Speed Dial key:
ON/OFF
1. Press the
The phone issues intercom dial tone.
l
ON/OFF
The
l
Chapter 4. Key Telephone Features
key.
LED lights.
4-91