6-1] System Speed Dial - Panasonic KX-TDA50 Pc Programming Manual

8.1 [6-1] System Speed Dial

8.1 [6-1] System Speed Dial
The System Speed Dialing Table is used to store frequently dialed numbers as well as callers who should be
automatically routed to certain extensions when they call (Calling Line Identification [CLI] distribution). The
System Speed Dialing Table is available for all extension users when making or receiving a call.
A maximum of 1000 System Speed Dialing numbers (e.g., telephone numbers, feature numbers) can be
programmed with other related parameters. 100 numbers are displayed at a time. To display other sets of
numbers, click the applicable tab.
Memory
Selects the System Speed Dialing Table to be programmed. Whether a tenant uses the basic System Speed
Dialing Table or the additional table (with MEC [KX-TDA50/KX-TDA100/KX-TDA200] or EMEC [KX-TDA600]
card) depends on the setting of
Default
Basic Memory
Value Range
For KX-TDA50:
Basic Memory: the standard table
Expanded Memory: additional table (only available when an MEC card is installed to the PBX)
For KX-TDA100/KX-TDA200:
Basic Memory: the standard table
Expanded Memory for Tenant 1–8: additional tables (only available when an MEC card is installed to the PBX)
For KX-TDA600:
Basic Memory: the standard table
Expanded Memory for Tenant 1–32: additional tables (only available when an EMEC card is installed to the
PBX)
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
8.6 [6-6] Tenant—
Feature Manual References
16.1.4 Speed Dialing, System
17.1.3 Tenant Service
Name
Specifies a name for the System Speed Dialing number.
Default
Not stored.
684 PC Programming Manual
System Speed Dial in 8.6 [6-6] Tenant.
System Speed Dial
Document Version 2010-11