Removing outer components
Remove the engine from the frame
(Removing the
engine).
Remove the clutch cover
(Removing the clutch
cover).
Remove the complete clutch unit
(Removing the
clutch).
Remove the oil pump
(Removing the oil
pump).
Remove the generator cover
(Removing the generator
cover).
Remove the heads
(Removing the engine
heads).
Remove the cylinder
(Removing the cylinder/piston
assembly).
Undo screw (1) and remove the blow-by valve (2) from the engine.
Check the condition of the O-rings (3) located in the casing and replace them if necessary.
Loosen and remove the two nipples (4) from the clutch crankcase half and collect washers (5).