Disassembling Gear Interlock Plunger And Ratchet - Ducati SCRAMBLER 800 Workshop Manual

Disassembling gear interlock plunger and ratchet

Drain the engine oil (Changing the engine oil and filter
cartridge).
Disconnect the oil pressure sensor.
Remove the clutch cover (Removing the clutch
cover).
Remove the clutch unit (Removing the
clutch).
Undo the interlock plunger screw (17) and remove the seal (18), the spring (19) and the ball (20).
Undo the clutch-side crankcase half screw (21) and remove the ratchet (22), the washer and the spring.