Table of Contents
Advertisement
Removing the steering tube components
Before removing the component, it is first necessary to remove the following parts:
Front wheel
(Removing the front
wheel).
Forks
(Removing the
forks).
Handlebar
(Removing the
handlebar).
Warning
All parts fitted to the steering head and bottom yoke, including wiring and hoses, can remain on the
motorcycle provided they do not hinder the following operations.
Use tool part no. (A) 88713.1058 to loosen ring nut (1) and remove it from the steering.
Remove seal ring (2), internal ring (3) and the ball race (4).
Advertisement
Table of Contents
