Entering Pin Code Function For Overriding Purposes; Entering The Code (A) - Ducati SCRAMBLER 800 Workshop Manual

Entering PIN CODE function for overriding purposes

In case of key acknowledgement system or key malfunction, the instrument panel allows the user to enter
his/her own PIN CODE to temporarily restore motorcycle operation.
If upon key-on an Immobilizer ERROR occurs, the instrument panel automatically activates in MENU 1 the
possibility to enter the four-digit PIN CODE previously memorised with the relevant function in the Setting
Menu, PIN page.

Entering the code (A):

Press button (2) or (1), only one digit indicating "0" starts flashing;
1
Each time you press button (2) the displayed number increases by one (+ 1) up to "9" and then starts
2
back from "0";
Each time you press the button (1) the displayed number decreases by one (- 1) up to "1" and then
3
starts back from "0";
To confirm the number, press the button (4);
4
Repeat the procedures until you confirm all the digits of the PIN CODE.
When you press button (4) to confirm the fourth and last digit:
if the PIN code (A) is correct, the instrument panel shows the message OK for 2 seconds followed by
-
the "standard screen" and enables the vehicle to start (C);
if the PIN code (B) is not correct, the instrument panel displays WRONG for 2 seconds and then
-
highlights the string of four dashes "- - - -" to allow you to try again. The number of possible attempts
is unlimited and determined by a preset time-out of 2 minutes (D). After 2 minutes, the instrument
panel shows the standard screen and does not allow the vehicle to start (E).
Important
If this procedure is necessary in order to start the motorcycle, contact an Authorised Ducati Service Centre
as soon as possible to fix the problem.
Note
The vehicle can be started until a Key-Off is performed. If the problem still persists upon the next starting
attempt, repeat the procedure from the beginning in order to start the motorcycle temporarily again.