Setting menu
This menu allows enabling, disabling and setting some motorcycle functions.
To enter the SETTING MENU it is necessary to hold button (3) for 2 seconds, with Key-ON and motorcycle
actual speed ≤ (lower than or equal to) 20 km/h: within this menu, it is no longer possible to view any
other function.
The SETTING MENU displays the following functions:
PIN CODE (activation and modification of PIN CODE);
-
CLOCK (clock settings);
-
B.LIGHT (backlighting settings);
-
BATTERY (battery voltage indication);
-
UNITS (units of measurement settings);
-
ABS (ABS control unit enabling/disabling);
-
EXIT (to quit the Setting Menu).
-
For safety reasons, the setting menu can be accessed only when vehicle speed is below or equal to 20
Km/h; if this menu is accessed and vehicle speed is above 20 Km/h, the instrument panel will automatically
quit it and shift back to main screen.
Press buttons (1) and (2) to highlight the customisable parameters one by one: in particular, use button (2)
to highlight the following item and button (1) to highlight the previous item.
After highlighting the required parameter, press button (4) to open the corresponding MENU (M) page.
If function is not available or temporarily disabled, the MENU page can not be opened.
To quit the SETTING MENU you shall highlight "EXIT" and press CONFIRM MENU button (4).