Table of Contents
Advertisement
Symbols - Abbreviations - References
To allow quick and easy consultation, this manual uses graphic symbols to highlight situations in which
maximum care is required, as well as practical advice or information. Pay attention to the meaning of the
symbols since they serve to avoid repeating technical concepts or safety warnings throughout the text. The
symbols should therefore be seen as real "reminders". Please refer to this page whenever in doubt as to
their meaning.
The terms right-hand and left-hand refer to the motorcycle viewed from the riding position.
Warning
Failure to comply with these instructions may put you at risk, and could lead to severe injury or even death.
Important
Failure to follow the instructions in text marked with this symbol can lead to serious damage to the
motorcycle and its components.
Note
This symbol indicates additional useful information for the current operation.
Product specifications
Symbols in the diagram show the type of threadlocker, sealant or lubricant to be used at the points
indicated. The table below shows the symbols used and the specifications of the various products.
Symbol
Specifications
Engine oil (for characteristics see
DOT 4 special hydraulic brake fluid.
SAE 80-90 gear oil or special products for chains with O rings.
Anti-freeze (nitride, amine and phosphate free) 30 to 40% + water.
GREASE
Multipurpose, medium fibre, lithium grease.
A
GREASE
Molybdenum disulphide grease, high mechanical stress and high
B
temperature resistant.
GREASE
Bearing/joint grease for parts subject to prolonged mechanical stress.
C
Temperature range: -10 to 110 °C.
Fuel, lubricants and other
Recommended
product
SHELL Advance 4T
fluids).
Ultra
SHELL Advance
Brake DOT 4
SHELL Advance
Chain or Advance
Teflon Chain
SHELL Advance
coolant or
Glycoshell
SHELL Alvania R3
SHELL Retinax
HDX2 or SHELL
Gadius S2 V220
AD 2
SHELL Retinax
LX2
Advertisement
Table of Contents
