Refitting The Front Sprocket - Ducati SCRAMBLER 800 Workshop Manual

Hide thumbs Also See for SCRAMBLER 800:

Table of Contents

Refitting the front sprocket

Check that the splines of the gearbox secondary shaft and the sprocket are in perfect condition.

Insert the sprocket on the gearbox secondary shaft and push it over the groove (7).

Respect the positioning shown in figure.

Insert stop plate (4) on the gearbox secondary shaft (5) and rotate it inside groove (7) until the plate holes

match the sprocket threaded holes: orient the stop plate with the rounded edge facing the sprocket.

Apply threadlocker on screw threading (3).

Engage the first gear.