Changing the spokes
Remove the tyre, the tube and the nipple protection cover from the rim and position the wheel on the
centring tool (B) no. 88713.2775.
Note
To perform these operations easily it may be necessary to remove the brake disc and loosen the other
spokes.
Unscrew nipple (11) and remove the damaged spoke (10) by sliding it off the seat in the hub.
Insert the new spoke in the seat of the hub and screw a new nipple (11) and tightening it to a minimum
torque of 4 Nm with a wrench (A) no. 88713.2776.