Refitting The Generator Cover - Ducati SCRAMBLER 800 Workshop Manual

Hide thumbs Also See for SCRAMBLER 800:

Table of Contents

Refitting the generator cover

Remove any scale and grease from the mating surfaces of the left-hand crankcase half and the generator

Fit the two centring bushes (26).

Spread a continuous uniform bead of DUCATI sealing compound on the cover mating surface, and around

the holes of the screws and bushes.

Tap the cover at different positions with a rubber mallet to facilitate its location on the shafts and centring

Insert the fixing screws in their holes following the indications given in the table.