Table of Contents
Advertisement
Each time you press the button (1) the displayed number decreases by one (- 1) up to "1" and then
3
starts back from "0";
To confirm the number, press the button (4);
4
Repeat the procedures until you confirm all the digits of the PIN CODE.
Press button (4) to confirm the fourth and last figure: the 4-digit code starts flashing.
To memorise the new setting, keep button (4) pressed for 3 seconds.
If new settings have been saved (D), "MEM" will be shown, the "EXIT" option will be highlighted and its box
will be flashing.
To quit, press button (4).
If settings have not been saved, the instrument panel will highlight again the string of four dashes "- - - -"
of the new PIN to allow the rider to try again and enter a new code.
Note
You can change your PIN CODE an unlimited number of times.
Activations through diagnosis instrument
The DUCATI diagnosis instrument allows performing a series of activations to check some instrument panel
functions and resetting parameters or warning lights.
After each activation, the instrument panel will restore its standard functions.
Advertisement
Table of Contents
