Instrument Panel Back-Lighting Setting (B.light) - Ducati SCRAMBLER 800 Workshop Manual

Instrument panel back-lighting setting (B.LIGHT)

This function allows adjusting the backlighting intensity.
To set the backlighting, enter the SETTING MENU, use buttons (1) and (2) to select "B.LIGHT" and press
button (4) to confirm.
When accessing the function, the active mode flashes whereas the MENU and EXIT messages will be steady
on.
Use buttons (1) and (2) to select the desired brightness level (HIGH, MED, LOW) and press button (4) to
confirm.
Select HIGH to set the display backlighting maximum brightness - recommended in conditions of strong
ambient light.
Select MED to set the display backlighting medium brightness (70%) - recommended in conditions of
medium/low ambient light.
Select LOW to set the display backlighting minimum brightness (50%) - recommended in conditions of low
ambient light and/or during the night.
After confirming, the "EXIT" box will start flashing.
To exit the menu and go back to the previous page, select "EXIT" and press button (4).
Note
In the event of an interruption of the power supply from the Battery, when power is restored, at the next
Key-On, the backlighting will always be set by default to maximum brightness.