Table of Contents
Advertisement
Adjusting the chain tension
Slowly move the motorcycle until you find the position where chain is tightest.
Set the motorcycle on the side stand.
Measure chain tension at the centre of the lower section, with the motorcycle on the side stand: lower the
chain by pressing down on it only with your finger, release it and measure the distance between the centre
of the chain pins and the aluminium section of the swingarm.
Value (A) must be: 27 ÷ 29 mm
If the chain tensioning has to be changed, proceed as follows:
Loosen rear wheel retaining nut (1).
Advertisement
Table of Contents
