Table of Contents
Advertisement
Note
Do not tilt the electrolyte container as this could interrupt the flow temporarily or even permanently.
Make sure that air bubbles emerge from all six filler holes. Leave the container in this position for at least
twenty minutes.
If no bubbles emerge from one of the holes, tap gently on the bottom of the respective container.
Important
Never move the container away from the battery. Do not cut or puncture the container.
Make sure that all the electrolyte has flowed out. Carefully extract the container (2) from the battery.
Fit the cap strip (3) previously removed from the electrolyte container (2) to the battery, and ensure the
caps plug off all filler holes.
Advertisement
Table of Contents
