Disassembling The Gear Change Control - Ducati SCRAMBLER 800 Workshop Manual

Hide thumbs Also See for SCRAMBLER 800:

Table of Contents

Disassembling the gear change control

Refer to the exploded view for indications on disassembly and replacement of components.

If the bush (11) inside the pedal (8) needs to be replaced, grease the external surface and drive the bush

into place using a press. The bush must be seated 2 mm below the outer face of the pedal.

After performing an operation on the gear shift, adjust the gear change pedal position following the

instructions detailed in Section

"Adjusting the position of the gear change pedal and rear brake