Ducati SCRAMBLER 800 Workshop Manual page 704

Hide thumbs Also See for SCRAMBLER 800:
Table of Contents

Advertisement

Refit the timing side cap
(Refitting the
camshafts).
Refit the timing pulleys
(Refitting the cylinder head
pulleys).
Position the valve opening shim.
With the valve in rest position, check that the clearance between rocker arm and the relevant adjuster is
the specified one.
If this is not the case, adjust the valve clearance.
Fit the lateral spring (4) on shaft (7) of the opening rocker arm (5) between the two spacers (8).

Advertisement

Table of Contents
loading

Table of Contents