Table of Contents
Advertisement
Removing the front fork
Support the front side of the vehicle in a suitable way.
Before removing the component, it is first necessary to remove the following parts:
Front brake calliper;
-
-
Front mudguard
(Removing the front
-
Front wheel
(Removing the front
Headlight;
-
-
Phonic wheel sensor
The procedure below refers to one fork but it applies to both forks.
Remove leg cover (A) by loosening screws (B) and recovering spacers (C).
The leg cover procedure is the same for all Scrambler customisations.
Loosen screw (1) securing the fork sleeve to the steering head (3).
mudguard); (NOT VALID FOR URBAN ENDURO)
wheel);
(Removing the brake
disc).
Advertisement
Table of Contents
