Table of Contents
Advertisement
Refitting the regulator
Position the regulator (1) on the support.
Tighten the screws to the specified torque of 10 Nm ± 10%.
Connect the connectors (2) and (3).
Important
Do not disconnect the battery cables when engine is running because this would cause irreparable damage
to the regulator.
Regulator fuse
The 30 A fuse, positioned inside electromagnetic switch (5), protects the electronic regulator.
Remove the seat
(Removing the
seat).
To reach the fuse, disconnect connector (6), remove protection cap (7) and remove fuse (A).
Advertisement
Table of Contents
