Filter cartridge
Remove the oil sump filter cartridge (3) using service tool part no. 88713.2906.
Important
Dispose of the used filter, do not re-use it.
Fit a new cartridge (3), using tool part no. 88713.2906.
Use engine oil to lubricate seal.
Note
As an alternative, it is advisable to refill the filter cartridge with engine oil before fitting it: this enables the
recommended oil level to be maintained without topping up.
Screw it into relevant seat and tighten it to 11 Nm (Min. 10 Nm - Max. 12 Nm).
Mesh filter