Changing the engine oil and filter cartridge
Engine oil
Note
This operation has to be carried out with hot engine (but turned off) because the oil in these conditions is
more fluid and comes out faster and completely.
Remove the drain plug (1) with gasket (2) from the oil sump and allow the oil to drain off.
Warning
Dispose of oil and/or filter cartridges in compliance with environmental protection regulations.
Remove any metal deposits from the end of the magnetic drain plug (1) and refit the drain plug complete
with gasket (2) to the sump.
Tighten plug (1) to a torque of 42 Nm (Min. 38 Nm - Max. 46 Nm).